AlignRC T-Rex600 Nitro Limited Edition(Power Pack) - Silver Version!
- A Long Waited BIG One!!! -
전세계 80,000대 이상이 판매된 World Best Seller - T-Rex600 Nitro Limited Edition.
T-Rex600 Nitro Limited Edition은 모든 부품이 풀 옵션으로 구성된 최상위 모델로서 모든 메탈 파트가 All Silver 사양으로 구성되어 있습니다.
주의 : T-Rex600 Limited Edition은 Head 색상이 Black에서 Silver로 변경된 제품으로서 조종기, 수신기를 제외한 Full System 구성입니다.
본 제품에는 OS OEM 50 Hyper Engine 및 ALIGN 50 High Performancve Muffler, 신형 DS610 Cyclic Servo x 3개, DS620 Throttle Servo x 1개, GP780 + DS650 Gyro System, RCE-G600 Governor, Gryphon Dual Linear Voltage Regulator(Extreme-Heli), ALIGN 600D Pro CF Rotor(Wood Core Verison)이 포함된 딜럭스 패키지 입니다.
- Original OS 50 Hyper Engine 및 ALIGN 50 High Performance Muffler 포함!
주의 : 국내 정식으로 수입되는 ALIGN사의 모든 Motor, ESC, Servo, Gyro는 전수 검사 후 출하되며 파쇄형 홀로그램 스티커가 붙어서 출하됩니다.
홀로그램 스티커가 없는 경우 A/S가 되지 않거나 유상수리 처리되므로 이점 양지말씀 드립니다.
(하기 이미지는 예제입니다.)
- ALIGN DS610 V2(Torque Type) Cyclic Servo 3Set 및 DS620 Throttle Servo 1Set 기본 포함!(총 4 Set)
- Field에서 검증된 GP780(Version.2)+DS650 Gyro System 기본 사양으로 포함!
- 3D를 위한 최상의 선택!
ALIGN 600D Rotor 기본 사양으로 포함!
- RPM 제어를 위한 필수 아이템!
ALIGN사의 RCE-G600 거버너 기본 사양으로 포함!
- 현존 최고의 레귤레이터로 각광받고 있는 [Gryphon] Dual Linear Voltage Regulator(Extreme-Heli) + 1,900mAh 수신기 배터리 기본 포함(Auto Booster는 별매입니다.)

- ALL New Design Canopy Trim
- All Silver Head System!
- Silver Anodized Metal Color Trim
- Fully Metal Tail Rotor Holder
- 보조 연료 탱크는 별매 입니다.

 
 
●Features 1.Bump resistance fiberglass painted canopy. Canopy also features a rigid easy clip on/off design for fast installation and removal. 2.Simple and light weight design provides awesome flight performance nearly equal to larger helicopters while still maintaining very stable hovering and flight. 3.+-14° collective pitch is possible for extreme 3D performance. 4.Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM. 5.Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG. 6.Pitch and All servos moved forward for CG. 7.Battery tray designed for easy and clean radio gear installation. 8.Fuel Tank Capacity 440cc for about 10 minutes 3D flying. 9.Main Gear Radio 8.5:1, 1500-2200 Rotor RPM. 10.Heavy duty tail with thrust bearings. 11.95mm Tail Blades. 12.Belt driven tail for incredible 50 sized performance. 13.Rigid frame design that can also handle hard crashes without damage. 14.G-10 3K Fiber frames, fins and boom supports. 15.Super engine cooling system features large diameter fan and very efficient airflow to provide unequaled cooling and horsepower. 16.Clutch/Start shaft feature a 10mm ID one way bearing to eliminate any bearing problems during starting and flight. 17.Ready to fly weight (no fuel) is an incredible 3.20Kg (7lbs). 18.Fuel Tank designed so that no additional header tank is required. 19.New main gear with one-way bearing design for high torque. 20.New flybar paddles feature light weight and sports. 21.New flybar control set design. 22.New tail boom supports.
<권장 사양>
- 조종기 : 6 ch 이상 CCPM 지원 조종기
- 수신기 : 6 ch 이상 PCM 수신기(Futaba or JR)
- 서보 : 제품에 포함되어 있습니다.
- 자이로 시스템 : 제품에 포함되어 있습니다.
- Engine : OS Hyper 50 Engine(별매)
- Rotor : 600mm FRP/Carbon Rotor(별매)
<제원>
●Length:1160mm ●Height:410mm ●Main blade length:600mm ●Main rotor diameter:1350mm ●Tail rotor diameter:240mm ●Engine pinion gear:20T ●Autorotation tail drive gear:180T ●Drive gear ratio:8.5:1:4.5(E:M:T) ●Flying weight:Approx. 3200g ●Color carton:72x25.7x12.5cm ●Outer carton:74.5x52.5x39.5cm ,6sets/ctn
<데모 동영상 보기>
Special Thanks to Alan Szabo!!!
<제품 이미지>
|