AlignRC T-Rex600EFL PRO KIT(w/MX600 Motor)
- 3rd Generation T-Rex600 EFL(Flybarless) PRO KIT
<구 성>
1. 필드에서 호평 받은 New MX600 모터의 High Voltage 버젼!
Li-Poly 기준 최대 48V(12 Cell)까지 지원하는 MX600 Motor 기본 포함!
2. 600mm Flybarless 전용 600D Rotor로터 기본 포함!
3. 95mm CF Tail Blade 기본 포함!
4. 새롭게 디자인 된 신형 플라이바리스 헤드.
Washout Base 일체형으로서 추락시 메인그립 Arm 만 간편하게 교체할 수 있도록 설계.
5. 역시 T-Rex700과 동일한 슬라이딩 배터리 트레이 마운팅 방식을 채용, 필드에서 보다 간편하게 배터리 교체 가능.
6. T-Rex500E/700E에서 호평 받은 헬리컬 방식 메인기어 시스템.
7. T-Rex700E에서 별매 옵션이 었던 Metal Elevator Servo Mount가 기본 사양.
8. 보다 간편한 테일 메인터넌스를 위한 테일서보 후방 마운팅 방식(카본 엠베디드)을 채택.
9. 전자 장비(ESC 및 Regulator등) 수납을 위한 H-Cross 섹션 노즈 마운트.
10. 완전히 새롭게 디자인 된 카본 테일 컨트롤 로드 세트.
11. 550E/600/700 시리즈에서 완전히 검증된 고효율 테일 샤프트 드라이브 방식.
12. 테일 슬라이더 내구성을 위한 컨트롤 암 및 내 마모성 Composite 슬리브 장착!
<Demo 동영상>
Special Thanks to Alan Szabo!
- Introduction
●Features
1.New aerodynamically efficient low drag flybarless head assembly,with detachable blade grip pitch arm for ease of maintenance.
2.The frame utilizes 2mm carbon fiber plates of the highest spec. Patented composite material construction technique cleverly utilize frame space that improved overall rigidity, and also created a minimalistic beauty.
3.Innovative sliding battery tray rails imbedded into the 3K side frames, with patented spring loaded latching mechanism, allowing for quick battery access as well as battery protection.
4.Top mounted motor base bringing the motor’s center of gravity closer to rotating disc, improving 3D agility.
5.Brand new 600 class 12S high voltage brushless motor providing generous torque and power output, yet consumes lower average current to prolong the life of batteries.
6.The most optimal motor pinion ratio and tail gear ratio to achieve the most efficient power output and flight characteristic.
7.Heatsink embedded into motor mount for effective cooling of motor.
8.Motor mount consists of third bearing block to provide motor shaft support, effectively reduce torque induced shifts, and minimize gear striping issue.
9.Utilize direct link CCPM swashplate control system to enable direct and fast control response. Specially designed anodized CNC servo horns are not only visually pleasing, but are extremely rigid.
10.Utilizes highest spec CNC modue-1 helical main gear, with highest load tolerance and lowest noise.
11.Ergonomically designed H-shaped electronic mount to provide flexible organization or equipment, and minimize wire clutter.
12.Brand new CNC machined metal tail gear box, with thicker side plates to increase rigidity. The more streamlined design also allows for simpler disassembly.
13.High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to improve rudder lockingand control effectiveness.
14.Additional radial bearing is added to the one way bearing block to ensure smooth rotation, and eliminate jammed one way bearing.
15.Tail pitch mechanism equipped with high precision bearing.
16.High speed thrust bearings in tail blade grips.
17.New lightened landing gear assembly with lower center of gravity.
18.High quality painted fiberglass canopy with 4-point quick release mounts.
- Specification
● Length: 1160mm
● Height: 340mm
● Width: 210mm
● Main Blade Length: 600mm
● Main Rotor Diameter: 1347mm
● Tail Rotor Diameter: 260mm
● Motor Drive Gear:13T
● Main Drive Gear:112T
● Autorotation Tail Drive Gear: 131T
● Tail Drive Gear: 34T
● Drive Gear Ratio: 1:8.61:3.85
● Weight(With Motor): 2290g
- Accessories
●T-REX 600EFL PRO Kits Set X1
●600 3G Carbon fiber blades X1
●600MX Brushless Motor(510KV) X1
<권장사양>
●Transmitter (7-channel or more, helicopter system)
●Receiver(7-channel or more)
●DS610 Digital servoX3
●DS650 Digital servo X1
●3GX Flybarless System X1
●Castle ICE HV 80 Brushless ESC X1
●6A External BEC w/ 5.1V Two-way Step-down voltage regulator X1
●6S Li-Po 2600 ~ 4600mAh X2 (3300mAh suggestion)
●Dial Pitch Gauge
|
![[Align] T-Rex600 EFL PRO KIT(w/600MX-510KV Motor)](upload/goods/gd_c1338431877_KX016018T.jpg){kind=small}
현재위치 : 
